Hard Alloy Tipped Tube Winder Neddle

Product Description

Hard Alloy Tipped Tube Winder Neddle Motor Coil tungsten Carbide Copper Wire Guide Winding Machine Ruby Nozzle

Ruby Coil Winding Nozzle For CNC Automatic Winding Machine

Detailed description

Ruby Nozzle is made of two main parts, stainless steel and the processed ruby. It has been widely used in CNC automatic winding machine.
The Ruby Material has the characteristics of extremely hard and wear-resistant by precise processing and combination. The rigidity of ruby is above than level 9 and is just less than that of diamond. Ruby nozzle guide is a single crystal and can be made with high brightness and cleanness. It can effectively protect paint film and ling term continual work.
Product Features:
1. High Wear Resistance This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.

2. Scratch-Proofing Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right
Application:
Wire coiling of fine coil and thin coil of various automatic winding machines.
Work Limit: D1>0.2mm D1>0.7mm

Series of fixing dimension Ø2
Serial	Model	Specification (mm)
		L	L1	D	D1	d1	d2	H
1	RC0326-2-1006	26	6	2	1.0	0.3	0.6	N/A
2	RC0326-2-0806	26	6	2	0.8	0.3	0.6	N/A
3	RC0330-2-0807	30	7	2	0.8	0.3	0.4	N/A
4	RC0335-2-0810	35	10	2	0.8	0.3	0.4	N/A
5	RC0535-2-1008	35	8	2	1.0	0.5	0.5	N/A
6	RC0535-2.5-1411	35	11	2.5	1.4	0.5	0.8	N/A
7	RC0336-2.5-1011	36	11	2.5	1.0	0.3	0.6	N/A
8	RR0635-2-1610	35	10	2	1.6	0.6	0.8	N/A
9	RS0535-2.5-1210	35	10	2.5	1.2	0.5	0.8	N/A
10	RC0530-2-1208	30	8	2	1.2	0.5	0.6	N/A
10	RS0830-2	30	N/A	2	2	0.8	0.8	N/A

Series of fixing dimension Ø3
Serial	Model	Specification(mm )
		L	L1	D	D1	d1	d2	H
1	W0330-3-1007	30	7	3	1.0	0.3	0.3	N/A
2	W0430-3-1007	30	7	3	1.0	0.4	0.4	N/A
3	W0530-3-1010	30	10	3	1.0	0.5	0.5	N/A
4	W0630-3-1007	30	7	3	1.0	0.6	0.6	N/A
5	W0330-3-0807	30	7	3	0.8	0.3	0.3	N/A
6	W0630-3-1211	30	11	3	1.2	0.6	0.6	N/A
7	W0630-3-1309	30	9	3	1.3	0.6	0.6	N/A
8	W0630-3-1511	30	11	3	1.5	0.6	0.6	N/A
9	W0611-3-1506P	11	6	3	1.5	0.6	0.6	5
10	W0614-3-1509P	14	9	3	1.5	0.6	0.6	5
11	W0814-3-1509P	14	9	3	1.5	0.8	0.8	5
12	W1014-3-1509P	14	9	3	1.5	1.0	1.0	5
13	W0414-3-1009P	14	9	3	1.0	0.4	0.4	5
14	W1030-3	30	N/A	3	N/A	1.0	1.0	N/A
15	W0326-3-0808	26	8	3	0.8	0.3	0.3	N/A
16	W0330-3-0810	30	10	3	0.8	0.3	0.3	N/A
17	W0330-3-0607	30	7	3	0.6	0.3	0.3	N/A
18	W03265-3-0811P	26.5	11	3	0.8	0.3	0.3	15
19	W0626-3-1208	26	8	3	1.2	0.6	0.6	N/A
20	W1030-3-2014	30	14	3	2.0	1.0	1.0	N/A
21	W1230-3-2514	30	14	3	2.5	1.2	1.2	N/A
22	W0330-3-0707	30	7	3	0.7	0.3	0.3	N/A
23	W0330-3-0502	30	2	3	0.5	0.3	0.3	N/A
24	W0626-3-1208	26	8	3	1.2	0.6	0.6	N/A
25	W0530-3-1210	30	10	3	1.2	0.5	0.5	N/A
26	W0330-3-0504	30	4	3	0.5	0.3	0.3	N/A
27	W0825-3	25	N/A	3	N/A	0.8	0.8	N/A
28	W0435-1211	35	11	3	1.2	0.4	0.4	N/A
29	W03535-3-0811	35	11	3	0.8	0.35	0.35	N/A
30	W0735-3-1411	35	11	3	1.4	0.7	0.7	N/A
31	W0430-3-0808	30	8	3	0.8	0.4	0.4	N/A
32	W1025-3-1608	25	8	3	1.6	1.0	1.0	N/A
33	W0845-3-2017	45	17	3	2	0.8	0.8	N/A
34	W1535-3	35	N/A	3	N/A	1.5	1.5	N/A
35	W0535-3-1211	35	11	3	1.2	0.5	0.5	N/A
36	W1036-3-2016	36	16	3	2.0	1.0	1.0	N/A
37	W0630-3-1212	30	12	3	1.2	0.6	0.6	N/A
38	W1022-3-2010	22	10	3	2.0	1.0	1.0	N/A

Series of fixing dimension Ø4
Serial	Model	Specification(mm)
		L	L1	D	D1	d1	d2	H
1	W0830-4-2015	30	15	4	2.0	0.8	0.8	N/A
2	W1243-4-2515	43	15	4	2.5	1.2	1.2	N/A
3	W1243-4-2515P	43	15	4	2.5	1.2	1.2	20
4	W0843-4-2015P	43	15	4	2.0	0.8	0.8	20
5	W1232-4.5	32	N/A	4.5	N/A	1.2	1.2	N/A
6	W1543-4-2512P	43	12	4	2.5	1.5	1.5	20
7	W0843-3.9-2019P	43	19	3.9	2.0	0.8	0.8	19
8	W2020-5	20	N/A	5	N/A	2.0	2.0	N/A